HPE Modular Smart Array P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit hard drive array

16,434.62 $

How can the flexibility of the HP P2000 G3 MSA Array Systems help remedy large storage needs and small budgets? By offering high-performance 8 Gb FC, Combo FC/iSCSI, 6 Gb SAS, 1 Gb or 10 GbE iSCSI connected arrays designed for efficient storage consolidation at affordable prices. The FC/iSCSI Combo controller gives the flexibility to share the array resources over two protocols, supporting the needs of dissimilar departments and budgets. All P2000 G3 MSA Arrays ship standard with 64 snapshots and volume copy enabled for increased data protection. The FC, Combo FC/iSCSI, and iSCSI controllers allow replication with optional Remote Snap software. The arrays allow departments and small to medium businesses to grow capacity as needed up to 149 drives. Mixing of LFF and SFF enterprise-class SAS and archival-class SATA drives is supported. Configure with a single controller for low initial cost, or dual controllers for high availability for the most demanding entry-level situations.

in stock

SKU: AP848B Category:

Description

HPE Modular Smart Array P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit – hard drive array
Device Type Hard drive array
Enclosure Type Rack-mountable – 2U
Interface 8Gb Fibre Channel
Maximum LUNs 512
Installed Devices / Modules Qty 0 (installed) / 24 (max)
Supported Drives SATA-300 / SAS-2
Storage Controller 2 x RAID (SATA 3Gb/s / SAS 6Gb/s) – RAID 0, 1, 3, 5, 6, 10, 50
Hard Drive SATA 3Gb/s / SAS 6Gb/s
OS Required HP-UX, Red Hat Linux, SUSE Linux Enterprise Server, Microsoft Windows Server 2003, HP OpenVMS, Microsoft Windows Server 2003 R2, Microsoft Windows Server 2008 Datacenter x64 Edition, Microsoft Windows Server 2008 Enterprise x64 Edition, Microsoft Windows Server 2008 Standard x64 Edition, Oracle Solaris 10
Power AC 120/230 V – 50/60 Hz
Power Redundancy Yes
Dimensions (WxDxH) 44.7 cm x 51.51 cm x 8.9 cm
General
Device Type Hard drive array
Enclosure Type Rack-mountable – 2U
Chassis
Installed Devices / Modules Qty 0
Supported Devices / Modules Qty 24
Supported Drives SATA-300 / SAS-2
Dimensions & Weight
Depth 51.51 cm
Height 8.9 cm
Width 44.7 cm
Environmental Parameters
Humidity Range Operating 10 – 90% (non-condensing)
Max Operating Temperature 40 °C
Min Operating Temperature 5 °C
Expansion / Connectivity
Expansion Bays 24 (total) / 24 (free) – 2.5″ SFF
Interfaces 4 x 8Gb Fibre Channel ¦ 2 x management – mini-USB Type B ¦ 2 x management – RJ-45
Hard Drive
Interface Type SATA 3Gb/s / SAS 6Gb/s
Miscellaneous
Compliant Standards FCC Class A certified, VCCI, CISPR 22 Class A, CISPR 24, GS, EN55022 Class A, CCC, FCC Part 15, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1-03, WEEE, RoHS, EN55024 Class A
Included Accessories 6x 8Gb single-port HBA, 2x 16-port 8Gb switch
Power
Power Device 2 x internal power supply – hot-plug
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V – 50/60 Hz
Storage
HDD Array External Interface 8Gb Fibre Channel
Maximum LUNs 512
Storage Controller
Cache / Buffer Size (Max) 4 GB
Data Transfer Rate 600 MBps
Interface Type SATA 3Gb/s / SAS 6Gb/s
RAID Level RAID 0, RAID 1, RAID 3, RAID 5, RAID 6, RAID 10, RAID 50
Type 2 x RAID (8Gb Fibre Channel)
System Requirements
OS Required HP-UX, Red Hat Linux, SUSE Linux Enterprise Server, Microsoft Windows Server 2003, HP OpenVMS, Microsoft Windows Server 2003 R2, Microsoft Windows Server 2008 Datacenter x64 Edition, Microsoft Windows Server 2008 Enterprise x64 Edition, Microsoft Windows Server 2008 Standard x64 Edition, Oracle Solaris 10

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.