Product categories

HPE 560 (AM) radio access point

695.37 $

HP 560 802.11ac Dual Radio Access Point Series bring 1.3 GbE performance, faster application processing, and increased range to 802.11 clients. Ideal for dense client environments and high bandwidth applications, the access points can be powered by Power over Ethernet (PoE) and offer full compatibility with legacy 802.11 clients and existing HP wireless controllers.

The access points can be used in managed as well as autonomous’ mode without a controller. The access points provides radio frequency spectrum analysis with detection and classification of non-IEEE 802.11 interference and has the ability to automatically avoid interference. Wireless security is comprehensive when operating with a controller; with integrated wireless DS/IPS, support for internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping; and authentication.

in stock

SKU: J9845A Category:

Description

HPE 560 (AM) – radio access point
Device Type Radio access point
Form Factor External – indoor
Localisation North America
Processor 1 x 800 MHz
RAM 256 MB
Flash Memory 128 MB
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Frequency Band 2.4 GHz, 5 GHz
Capacity VoIP calls: 12 ¦ Maximum number of configured SSIDs: 16
Included Accessories 2 x ceiling mounting clip
Power Over Ethernet (PoE) Supported PoE+
Dimensions (WxDxH) 20.32 cm x 17.15 cm x 6.65 cm
Weight 1.02 kg
Manufacturer Warranty Limited lifetime warranty
General
Depth 17.15 cm
Device Type Radio access point
Height 6.65 cm
Localisation North America
Ruggedized Design Indoor
Weight 1.02 kg
Width 20.32 cm
Aerial
Antenna Internal
Antenna Qty 6
Environmental Parameters
Humidity Range Operating 5 – 95% (non-condensing)
Max Operating Temperature 50 °C
Min Operating Temperature 0 °C
Expansion / Connectivity
Interfaces 1 x 1000Base-T – RJ-45 ¦ 1 x management – RJ-45
Manufacturer Warranty
Service & Support Limited warranty – advance parts replacement – lifetime – response time: next business day ¦ Technical support – phone consulting – 3 years
Miscellaneous
Compliant Standards EN55022 Class B, ICES-003 Class B, EN 301.489.1, EN 301.489.17, FCC Part 15 B, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC CFR47, EN 301.893, FCC Part 15.407, EN 60601-1-2, ARIB STD-T66, ARIB STD-T71, RCR STD-33, CAN/CSA C22.2 No. 60950-1, iDA, EN 300 328
Included Accessories 2 x ceiling mounting clip
Networking
Authentication Method RADIUS, PAP, CHAP, Radio Service Set ID (SSID), MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity VoIP calls: 12 ¦ Maximum number of configured SSIDs: 16
Communication Mode Half-duplex, full-duplex
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac
Connectivity Technology Wireless
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Data Transfer Rate 1.3 Gbps
Encryption Algorithm MD5, AES, SSL, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WEP
Features Intrusion Detection System (IDS), Intrusion Prevention System (IPS), Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Quality of Service (QoS), Management Information Base (MIB), Wi-Fi Clear Connect, Virtual Service Community (VSC)
Form Factor External
Frequency Band 2.4 GHz, 5 GHz
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 3, SNMP 2c
Power
Power Consumption Operational 14 Watt
Power Over Ethernet (PoE) Supported PoE+
Processor / Memory / Storage
Flash Memory 128 MB
Processors Installed 1 x 800 MHz
RAM 256 MB

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products