HPE Write Intensive solid state drive – 1.6 TB – SATA 6Gb/s
3,310.27 $
Do you need more performance from your HP ProLiant Sever series platforms? HP Enterprise Solid State Drives (SSDs) deliver exceptional performance and endurance while reducing power consumption for customers with applications requiring high random read and write IOPs performance. You can prevent data loss and monitor the SSD life with HP SmartSSD Wear Gauge compatibility in management tools.
Leveraging NAND Flash technology, they support HP ProLiant servers including Gen9 and server storage platforms. Because they are available as Small Form Factor (SFF) and Large Form Factor (LFF) hot plug devices, non-hot plug SFF devices, and SFF Quick Release devices, you have great flexibility in your installation.
These drives deliver higher performance, better latency, and more power-efficient solutions when compared with traditional rotating media (HDDs). Plus they fit seamlessly into the existing HP server infrastructure.
in stock
Description
| HPE Write Intensive – solid state drive – 1.6 TB – SATA 6Gb/s | |
|---|---|
| Type | Solid state drive – hot-swap |
| Capacity | 1.6 TB |
| Form Factor | 3.5" LFF |
| Interface | SATA 6Gb/s |
| Data Transfer Rate | 600 MBps |
| Features | Multi-level cell (MLC), Digitally Signed Firmware |
| Dimensions (WxDxH) | 1.5 cm x x |
| Manufacturer Warranty | 3 years warranty |
| Bundled with | HPE SmartDrive carrier |
| Designed For | ProLiant DL120 Gen9 (3.5"), DL120 Gen9 Entry (3.5"), DL360 Gen10 (3.5"), DL360 Gen10 Base (3.5"), DL360 Gen10 Entry (3.5"), DL360 Gen10 High Performance (3.5"), DL360 Gen10 Performance (3.5"), DL380 Gen10 (3.5"), DL380 Gen10 Base (3.5"), DL380 Gen10 Entry (3.5"), DL380 Gen10 High Performance (3.5"), DL380 Gen10 Performance (3.5"), DL388 Gen9 (3.5"), DL388 Gen9 Base (3.5"), DL60 Gen9 (3.5"), DL60 Gen9 Base (3.5"), DL60 Gen9 Entry (3.5"), DL80 Gen9 (3.5"), DL80 Gen9 Base (3.5"), DL80 Gen9 Entry (3.5") |
| General | |
| Bundled with | HPE SmartDrive carrier |
| Capacity | 1.6 TB |
| Device Type | Solid state drive – hot-swap |
| Features | Multi-level cell (MLC), Digitally Signed Firmware |
| Form Factor | 3.5″ LFF |
| Height | 1.5 cm |
| Interface | SATA 6Gb/s |
| Compatibility Information | |
| Designed For | HPE ProLiant DL120 Gen9 (3.5″), DL120 Gen9 Entry (3.5″), DL360 Gen10 (3.5″), DL360 Gen10 Base (3.5″), DL360 Gen10 Entry (3.5″), DL360 Gen10 High Performance (3.5″), DL360 Gen10 Performance (3.5″), DL380 Gen10 (3.5″), DL380 Gen10 Base (3.5″), DL380 Gen10 Entry (3.5″), DL380 Gen10 High Performance (3.5″), DL380 Gen10 Performance (3.5″), DL388 Gen9 (3.5″), DL388 Gen9 Base (3.5″), DL60 Gen9 (3.5″), DL60 Gen9 Base (3.5″), DL60 Gen9 Entry (3.5″), DL80 Gen9 (3.5″), DL80 Gen9 Base (3.5″), DL80 Gen9 Entry (3.5″) |
| Expansion & Connectivity | |
| Compatible Bay | 3.5″ LFF |
| Interfaces | 1 x SATA 6 Gb/s |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – 3 years |
| Performance | |
| 4KB Random Read | 61500 IOPS |
| 4KB Random Write | 54500 IOPS |
| Average Latency | 110 µs |
| Drive Transfer Rate | 600 MBps (external) |
| Drive Writes Per Day (DWPD) | 10 |
| Internal Data Rate | 500 MBps (read) / 475 MBps (write) |
Only logged in customers who have purchased this product may leave a review.
Related products
HPE Mixed Use solid state drive – 800 GB – SAS 12Gb/s
HPE Mixed Use solid state drive - 800 GB - SAS 12Gb/sHPE Mixed Use solid state drive - 800 GB - SAS 12Gb/s
HP Quick-release Midline solid state drive – 100 GB – SATA 3Gb/s
Marketing description is not available.Marketing description is not available.
Reviews
There are no reviews yet.