HPE 5800AF-48G switch – 48 ports – Managed – rack-mountable
4,202.46 $
HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models and 1 RU and 2 RU flex chassis configurations, HP 5800 switches are built on open standards and include an open application architecture (OAA) module slot that that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as a high-performance switch in the convergence layer or network edge of enterprise campus networks.
in stock
Description
| HPE 5800AF-48G – switch – 48 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 + 6 x Gigabit SFP / 10 Gigabit SFP+ |
| Performance | Routing/switching capacity: 216 Gbps ¦ Throughput: 161 Mpps ¦ Latency (64-byte packets): 5 µs |
| Capacity | Routing table entries: 16000 |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | Yes |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, RIPng, IS-ISv6, MPLS |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, CLI |
| Features | Flow control, routing, Layer 3 switching, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, IPv6 support, Weighted Random Early Detection (WRED), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Equal-Cost Multipath (ECMP), STP Root Guard, Unicast Reverse Path Forwarding (URPF) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (LLDP) |
| Power | (50/60 Hz) |
| Dimensions (WxDxH) | 43.99 cm x 65.99 cm x 4.37 cm |
| Weight | 10 kg |
| Manufacturer Warranty | Limited lifetime warranty |
| General | |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2) |
| Capacity | Routing table entries: 16000 |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (LLDP) |
| Device Type | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type | Rack-mountable 1U |
| Encryption Algorithm | PKI |
| Features | Flow control, routing, Layer 3 switching, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, IPv6 support, Weighted Random Early Detection (WRED), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Equal-Cost Multipath (ECMP), STP Root Guard, Unicast Reverse Path Forwarding (URPF) |
| Flash Memory | 512 MB |
| Jumbo Frame Support | Yes |
| MAC Address Table Size | 32000 entries |
| Performance | Routing/switching capacity: 216 Gbps ¦ Throughput: 161 Mpps ¦ Latency (64-byte packets): 5 µs |
| Ports | 48 x 10/100/1000 + 6 x Gigabit SFP / 10 Gigabit SFP+ |
| RAM | 2 GB SDRAM |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, CLI |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, RIPng, IS-ISv6, MPLS |
| Subtype | Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 65.99 cm |
| Height | 4.37 cm |
| Weight | 10 kg |
| Width | 43.99 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% (non-condensing) |
| Max Operating Temperature | 45 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces | 48 x 1000Base-T RJ-45 ¦ 6 x Gigabit / 10Gbit LAN ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB 2.0 Type A ¦ 1 x RJ-45 management |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – lifetime – response time: next business day |
| Miscellaneous | |
| Compliant Standards | GOST, NOM, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, CSA C22.2 No. 60950-1, EN 60825-1 |
| Power | |
| Installed Qty | 2 (max) |
| Power Device | Internal power supply |
| Voltage Required | (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Related products
HPE Hardware Interface Module expansion module
Marketing description is not available.Marketing description is not available.
HPE Front to Back Airflow Fan Tray network device fan tray
This airflow fan tray is hot-swappable, allowing easy replacement in the rack.This airflow fan tray is hot-swappable, allowing easy replacement in the rack.
HPE Synergy 3830C host bus adapter
Designed for the HPE Synergy composable fabric, HPE Synergy 3830C Fiber Channel host bus adapter connects Synergy compute resource pools to SANs over native Fiber Channel (FC) fabrics. It provides high-performance connectivity to HPE Synergy Virtual Connect FC modules and Brocade FC switch modules. The Synergy 3830C supports advanced virtualization, security, dual-port isolation, dynamic power…Designed for the HPE Synergy composable fabric, HPE Synergy 3830C Fiber Channel host bus adapter connects Synergy compute resource pools to SANs over native Fiber…
Reviews
There are no reviews yet.