3,819.34 $
Do you need a platform built to address your virtualized and memory-centric workloads? The ProLiant DL385 Gen10 server has been designed with the security you need and the flexibility you require to accommodate demanding enterprise workloads.
in stock
HPE ProLiant DL385 Gen10 – rack-mountable – no CPU – 0 GB – 0 GB | |
---|---|
Type | Server – rack-mountable |
Height (Rack Units) | 2U |
Localisation | Worldwide |
Server Scalability | 2-way |
Processor | No CPU |
RAM | 0 GB (installed) / 1 TB (max) – DDR4 SDRAM |
Storage Controller | RAID (SATA 6Gb/s) – PCIe 3.0 x4 (HPE Smart Array S100i SR Software RAID) |
Server Storage Bays | Hot-swap 3.5" |
Hard Drive | No HDD |
Card Reader | Yes |
Video Memory | 16 MB |
Networking | GigE |
Power | AC 120/230 V (50/60 Hz) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44.55 cm x 73.02 cm x 8.73 cm |
Weight | 14.9 kg |
Pricing Type | CTO |
Environmental Standards | ENERGY STAR Qualified |
Manufacturer Warranty | 3 years warranty – on-site |
General | |
Built-in Devices | Led panel |
Hot-Swap Bays Qty | 8 |
Localisation | Worldwide |
Product Form Factor | Rack-mountable – 2U |
Server Scalability | 2-way |
Type | Server |
Card Reader | |
Supported Flash Memory Cards | microSD |
Type | Card reader |
Dimensions & Weight | |
Depth | 73.02 cm |
Height | 8.73 cm |
Weight | 14.9 kg |
Width | 44.55 cm |
Environmental Parameters | |
Humidity Range Operating | 8 – 90% (non-condensing) |
Max Operating Temperature | 35 °C |
Min Operating Temperature | 10 °C |
Environmental Standards | |
ENERGY STAR Certified | Yes |
ENERGY STAR Version | 2.1 |
Expansion / Connectivity | |
Bays | 1 (total) / 1 (free) x external ¦ 8 (total) / 8 (free) x hot-swap 3.5″ LFF |
Interfaces | 1 x HP iLO – Type A (1 in front) ¦ 5 x USB 3.0 (1 front, 2 rear, 2 internal) ¦ 4 x LAN (Gigabit Ethernet) – RJ-45 (4 rear) ¦ 1 x HP iLO – RJ-45 (1 rear) ¦ 1 x VGA (1 rear) |
Slots | 1 (total) / 0 (free) x FlexibleLOM ¦ 1 (total) / 1 (free) x PCIe 3.0 x16 – half-length, full-height ¦ 2 (total) / 2 (free) x PCIe 3.0 x8 – half-length, full-height ¦ 1 (total) / 1 (free) x microSD Card (internal) ¦ 2 (total) / 2 (free) x CPU |
Graphics Controller | |
Video Interfaces | VGA |
Video Memory | 16 MB |
Hard Drive | |
Type | No HDD |
Manufacturer Warranty | |
Service & Support | Limited warranty – parts and labour – 3 years – on-site – response time: next business day |
Miscellaneous | |
Compliant Standards | AES, FIPS 140-2, IPv6 Ready, TLS v1.2, ASHRAE Class A4, ASHRAE Class A3, WEEE 2002/95/EC, ACPI 6.1 |
Included Accessories | 6 x standard hot plug fans |
Pricing Type | CTO |
Monitor | |
Monitor Type | None. |
Networking | |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as, IEEE 802.3az |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Ethernet Controller | HPE 331i |
Ethernet Ports | 4 x Gigabit Ethernet |
Features | Wake on LAN (WoL), ACPI support, PXE support |
Interface (Bus) Type | PCI Express 2.0 x4 |
Remote Management Controller | Integrated Lights-Out 5 |
Remote Management Protocol | SNMP 3, IPMI 2.0, SMASH CLP |
Operating System / Software | |
Software | HPE iLO Standard with Intelligent Provisioning |
Power | |
Device Type | Power supply – hot-plug |
Installed Qty | 0 |
Max Supported Qty | 2 |
Nominal Voltage | AC 120/230 V (50/60 Hz) |
Power Redundancy | Optional |
Power Redundancy Scheme | 1+1 (with optional power supply) |
Processor / Chipset | |
CPU | No CPU |
CPU Upgradability | Upgradable |
Max CPU Qty | 2 |
RAM | |
Features | HPE SmartMemory |
Form Factor | DIMM 288-pin |
Installed Size | 0 GB / 1 TB (max) |
RAM Supported | 1 TB registered ¦ 4 TB Load-Reduced |
Technology | DDR4 SDRAM |
Storage Controller | |
Channel Qty | 14 |
Controller Interface Type | SATA 6Gb/s |
RAID Level | RAID 0, RAID 1, RAID 5, RAID 10 |
Storage Controller Name | HPE Smart Array S100i SR Software RAID |
Type | 1 x RAID – PCIe 3.0 x4 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.