12,459.88 $
HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, low-latency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network, consolidating devices and appliances to simplify deployment and reduce power consumption as well as rack space.
Extremely versatile, the switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.
in stock
HPE 5820X-24XG-SFP+ Switch – switch – 24 ports – Managed – rack-mountable | |
---|---|
Device Type | Switch – 24 ports – L3 – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 24 x 10 Gigabit SFP+ + 4 x 10/100/1000 |
Performance | Throughput (64-byte packet size): 363 Mpps ¦ Routing/switching capacity: 488 Gbps ¦ Latency (64-byte packets): 2.02 µs |
Capacity | IPv4 routing table entries: 12000 |
MAC Address Table Size | 32K entries |
Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, VRRPE, policy-based routing (PBR), RIPng, MLDv2, MLD, IS-ISv6, BGP-4+ |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, Telnet, SNMP 3, SNMP 2c, HTTPS, SSH, CLI |
Features | Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, IPv6 support, full duplex mode, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, DHCP server, MLD snooping, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Unicast Reverse Path Forwarding (URPF), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, Link Aggregation Control Protocol (LACP), Port Security, NTP time synchronisation, port isolation |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP) |
Power | (50/60 Hz) |
Dimensions (WxDxH) | 44 cm x 42.7 cm x 4.4 cm |
Weight | 8.5 kg |
Manufacturer Warranty | 1 year warranty |
General | |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS, Secure Shell v.2 (SSH2), HWTACACS |
Capacity | IPv4 routing table entries: 12000 |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP) |
Device Type | Switch – 24 ports – L3 – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Encryption Algorithm | PKI |
Features | Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, IPv6 support, full duplex mode, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, DHCP server, MLD snooping, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Unicast Reverse Path Forwarding (URPF), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, Link Aggregation Control Protocol (LACP), Port Security, NTP time synchronisation, port isolation |
Flash Memory | 512 MB |
MAC Address Table Size | 32K entries |
Performance | Throughput (64-byte packet size): 363 Mpps ¦ Routing/switching capacity: 488 Gbps ¦ Latency (64-byte packets): 2.02 µs |
Ports | 24 x 10 Gigabit SFP+ + 4 x 10/100/1000 |
RAM | 2 GB SDRAM |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, Telnet, SNMP 3, SNMP 2c, HTTPS, SSH, CLI |
Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, VRRPE, policy-based routing (PBR), RIPng, MLDv2, MLD, IS-ISv6, BGP-4+ |
Subtype | 10 Gigabit Ethernet |
Dimensions & Weight | |
Depth | 42.7 cm |
Height | 4.4 cm |
Weight | 8.5 kg |
Width | 44 cm |
Environmental Parameters | |
Humidity Range Operating | 10 – 90% (non-condensing) |
Max Operating Temperature | 45 °C |
Min Operating Temperature | 0 °C |
Expansion / Connectivity | |
Interfaces | 4 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 24 x 10Gbit LAN SFP+ |
Manufacturer Warranty | |
Service & Support | Limited warranty – advance parts replacement – 1 year |
Miscellaneous | |
Compliant Standards | FCC Class A certified, ETSI, CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, NOM, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, EN 60825-1, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2003, EN 60825-2 |
Power | |
Installed Qty | 2 (max) |
Power Device | Internal power supply |
Voltage Required | (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.