HPE FlexFabric 7910 switch – Managed – rack-mountable
3,743.63 $
HP FlexFabric 7900 Modular Core Switch is a compact modular data center core switch supporting virtualized data centers and evolutionary needs of private and public clouds deployments. Delivering unprecedented levels of performance, buffering, scale, and availability with high density interfaces at a lower cost, using only a fraction of the footprint used by traditional chassis.
The switch supports full Layer 2 and 3 features, including advanced features such as TRILL and HP Intelligent Resilient Fabric (IRF), which enable scale-out, two-tier leaf-spine architecture.
in stock
Description
| HPE FlexFabric 7910 – switch – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – L3 – Managed |
| Enclosure Type | Rack-mountable 5U |
| Performance | Throughput (64-byte packet size): 5.8 Bpps ¦ Switching capacity: 9.6 Tbps |
| Capacity | IPv4 routing table entries: 32768 |
| MAC Address Table Size | 131072 entries |
| Jumbo Frame Support | 12288 bytes |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, IGMPv2, IGMP, IGMPv3, static IPv4 routing, ECMP |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, CLI |
| Features | Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA) |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 43.99 cm x 76 cm x 22 cm |
| Weight | 28.8 kg |
| Manufacturer Warranty | 1 year warranty |
| General | |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2) |
| Capacity | IPv4 routing table entries: 32768 |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba |
| Device Type | Switch – L3 – Managed |
| Enclosure Type | Rack-mountable 5U |
| Features | Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA) |
| Flash Memory | 1 GB |
| Jumbo Frame Support | 12288 bytes |
| MAC Address Table Size | 131072 entries |
| Performance | Throughput (64-byte packet size): 5.8 Bpps ¦ Switching capacity: 9.6 Tbps |
| Processor | 1 x MIPS MIPS64: 1 GHz |
| RAM | 8 GB DDR2 SDRAM |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, CLI |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, IGMPv2, IGMP, IGMPv3, static IPv4 routing, ECMP |
| Dimensions & Weight | |
| Depth | 76 cm |
| Height | 22 cm |
| Weight | 28.8 kg |
| Width | 43.99 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 95% (non-condensing) |
| Humidity Range Storage | 5 – 95% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Max Storage Temperature | 70 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -40 °C |
| Expansion / Connectivity | |
| Expansion Slots | 10 (total) / 10 (free) x Expansion Slot |
| Installed Modules Qty (Max) | 0 (installed) / 10 (max) |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – 1 year – response time: 10 days |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, FDA, CAN/CSA C22.2 No. 60950-1, VCCI Class A, EN 50581 |
| Rack Mounting Kit | Included |
| Power | |
| Installed Qty | 0 (installed) / 2 (max) |
| Power Device | Internal power supply |
| Power Redundancy | Optional |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Related products
Aruba 2530-8-PoE+ switch – 8 ports – Managed – rack-mountable
The HP 2530 switch series delivers cost-effective, reliable, secure, and easy-to-use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and Fast Ethernet switch delivers full Layer 2 capabilities, enhanced access security, traffic prioritization, and IPv6 host support. The switch series is easy to use, deploy, and manage via SNMP, CLI,…The HP 2530 switch series delivers cost-effective, reliable, secure, and easy-to-use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and…
Brocade XBR-R000291 Deep rack mounting kit – 27"-31" – HPE Complete
Marketing description is not available.Marketing description is not available.
HPE expansion module
Marketing description is not available.Marketing description is not available.
Reviews
There are no reviews yet.