HPE 5800-48G-PoE+ Switch with 1 Interface Slot switch – 48 ports – Managed – rack-mountable
9,051.64 $
HP 5800 series switch offers an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switch includes patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switch to be interconnected for higher resiliency and performance. This switch is ideal for use in the network core of buildings or departments, or as a high-performance switch in the convergence layer or network edge of enterprise campus networks.
in stock
Description
| HPE 5800-48G-PoE+ Switch with 1 Interface Slot – switch – 48 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 48 ports – Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP / 10 Gigabit SFP+ |
| Power Over Ethernet (PoE) | PoE+ |
| Performance | Routing/switching capacity: 256 Gbps ¦ Throughput: 190 Mpps |
| MAC Address Table Size | 32K entries |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, BGP-4+ |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI |
| Features | Flow control, routing, Layer 3 switching, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Equal-Cost Multipath (ECMP), STP Root Guard, Unicast Reverse Path Forwarding (URPF) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1ad, IEEE 802.1ab (LLDP) |
| Power | AC 120/230 V (50/60 Hz) |
| Dimensions (WxDxH) | 44 cm x 42.7 cm x 4.36 cm |
| Weight | 8.5 kg |
| Manufacturer Warranty | Limited lifetime warranty |
| General | |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1ad, IEEE 802.1ab (LLDP) |
| Device Type | Switch – 48 ports – Managed |
| Enclosure Type | Rack-mountable 1U |
| Encryption Algorithm | SSL, PKI |
| Features | Flow control, routing, Layer 3 switching, Layer 2 switching, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Equal-Cost Multipath (ECMP), STP Root Guard, Unicast Reverse Path Forwarding (URPF) |
| Flash Memory | 512 MB Flash |
| MAC Address Table Size | 32K entries |
| Performance | Routing/switching capacity: 256 Gbps ¦ Throughput: 190 Mpps |
| Ports | 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP / 10 Gigabit SFP+ |
| Power Over Ethernet (PoE) | PoE+ |
| RAM | 1 GB SDRAM |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, BGP-4+ |
| Subtype | Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 42.7 cm |
| Height | 4.36 cm |
| Weight | 8.5 kg |
| Width | 44 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% |
| Max Operating Temperature | 45 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Expansion Slots | 1 (total) / 1 (free) x Expansion Slot |
| Interfaces | 1 x console RJ-45 management ¦ 48 x 1000Base-T RJ-45 PoE+ ¦ 4 x SFP+ |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – lifetime |
| Miscellaneous | |
| Compliant Standards | GOST, NOM, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, CSA C22.2 No. 60950-1, EN 60825-1 |
| Power | |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Related products
HPE expansion module
Marketing description is not available.Marketing description is not available.
Aruba 2530-48G switch – 48 ports – Managed – rack-mountable
HP 2530 switch series consists of four fully managed layer 2 edge switches, delivering cost-effective, reliable, and secure connectivity for business networks. Designed for entry-level to midsize enterprise networks, these Gigabit Ethernet switches deliver full layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 host support. The 2530 switch has 48 10/100/1000 ports…HP 2530 switch series consists of four fully managed layer 2 edge switches, delivering cost-effective, reliable, and secure connectivity for business networks. Designed for entry-level…
HPE Front to Back Airflow Fan Tray network device fan tray
Front (port side) to back (power side) airflow fan tray for the HP FlexFabric 5930 4-slot Switch.Front (port side) to back (power side) airflow fan tray for the HP FlexFabric 5930 4-slot Switch.
Reviews
There are no reviews yet.