HPE FlexFabric 5900CP-48XG-4QSFP+ Front-to-Back AC Switch Bundle switch – 48 ports – Managed – rack-mountable
25,100.65 $
This HP FlexFabric switch is a high-density, ultra-low-latency, converged, top-of-rack (ToR) switch that is part of the HP FlexNetwork architecture’s HP FlexFabric solution. Ideally suited for deployment at the server access layer of medium or large enterprise data centers, the HP FlexFabric switch is also powerful enough for deployment at the data center core layer of medium-sized enterprises. With the increase in virtualized applications and server-to-server traffic, customers now require ToR switch improvements that will meet their needs for higher-performance server connectivity, convergence of Ethernet and storage traffic, the capability to handle virtual environments, and ultra-low-latency all in a single device.
in stock
Description
| HPE FlexFabric 5900CP-48XG-4QSFP+ Front-to-Back AC Switch Bundle – switch – 48 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 48 ports – L3 – Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 40 Gigabit Ethernet |
| Ports | 48 x 1 Gigabit / 10 Gigabit / 4 Gb Fiber Channel / 8 Gb Fiber Channel SFP+ + 4 x 40 Gigabit QSFP+ |
| Performance | Throughput: up to 952 Mpps ¦ Routing/switching capacity: 1280 Gbps |
| Capacity | IPv4 routing table entries: 16000 ¦ IPv6 routing table entries: 8000 ¦ Virtual interfaces (VLANs): 4096 |
| MAC Address Table Size | 128K entries |
| Jumbo Frame Support | Yes |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMP, VRRP, OSPFv2, OSPFv3, Multiprotocol BGP, static IPv4 routing, static IPv6 routing, ECMP, RIPng, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol | SNMP 1, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Features | Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, IPv6 support, SNTP support, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, tunnelling, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, DHCP relay, Port Security, Data Center Bridging (DCB), fan tray, role based access control, Management Information Base (MIB), dual firmware images, Strict Priority Queuing (SPQ), Neighbor Discovery Protocol (NDP), NTP time synchronisation, 9MB packet buffer, FCoE forwarding, Class of Service (CoS), Intelligent Resilient Framework Technology (IRF), Multicast Border Gateway Protocol (MBGP), Type of Service (ToS), cut-through, DiffServ Code Point (DSCP) support |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3ag |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 43.99 cm x 65.99 cm x 4.37 cm |
| Weight | 13 kg |
| System Requirements | Comware v7 |
| General | |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
| Capacity | IPv4 routing table entries: 16000 ¦ IPv6 routing table entries: 8000 ¦ Virtual interfaces (VLANs): 4096 |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3ag |
| Device Type | Switch – 48 ports – L3 – Managed |
| Enclosure Type | Rack-mountable 1U |
| Encryption Algorithm | MD5 |
| Features | Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, IPv6 support, SNTP support, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, tunnelling, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, DHCP relay, Port Security, Data Center Bridging (DCB), fan tray, role based access control, Management Information Base (MIB), dual firmware images, Strict Priority Queuing (SPQ), Neighbor Discovery Protocol (NDP), NTP time synchronisation, 9MB packet buffer, FCoE forwarding, Class of Service (CoS), Intelligent Resilient Framework Technology (IRF), Multicast Border Gateway Protocol (MBGP), Type of Service (ToS), cut-through, DiffServ Code Point (DSCP) support |
| Flash Memory | 512 MB |
| Jumbo Frame Support | Yes |
| MAC Address Table Size | 128K entries |
| Performance | Throughput: up to 952 Mpps ¦ Routing/switching capacity: 1280 Gbps |
| Ports | 48 x 1 Gigabit / 10 Gigabit / 4 Gb Fiber Channel / 8 Gb Fiber Channel SFP+ + 4 x 40 Gigabit QSFP+ |
| RAM | 2 GB SDRAM |
| Remote Management Protocol | SNMP 1, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMP, VRRP, OSPFv2, OSPFv3, Multiprotocol BGP, static IPv4 routing, static IPv6 routing, ECMP, RIPng, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD) |
| Subtype | 40 Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 65.99 cm |
| Height | 4.37 cm |
| Weight | 13 kg |
| Width | 43.99 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% (non-condensing) |
| Max Operating Temperature | 45 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces | 48 x SFP+ ¦ 4 x 40Gbit LAN QSFP+ ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB 2.0 management ¦ 1 x RJ-45 management |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, EN 60825-1, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2003, EN 60825-2, VCCI Class A, EMC 2004/108/EC, EN55024:1998 + A1:2001 + A2:2003, EN 300 386 V1.3.3 |
| Included Accessories | HP A58x0AF Front (port side) to Back (power side) Airflow Fan Tray |
| Power | |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Consumption Operational | 260 Watt |
| Power Device | Internal power supply – hot-plug |
| Power Provided | 650 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| OS Required | Comware v7 |
Only logged in customers who have purchased this product may leave a review.
Related products
HPE Front to Back Airflow Fan Tray network device fan tray
This airflow fan tray is hot-swappable, allowing easy replacement in the rack.This airflow fan tray is hot-swappable, allowing easy replacement in the rack.
HPE SF Module expansion module
Marketing description is not available.Marketing description is not available.
HPE SG Module expansion module
Marketing description is not available.Marketing description is not available.
Reviews
There are no reviews yet.