HPE FlexFabric 7904 switch – Managed – rack-mountable
19,302.74 $
HP FlexFabric 7904 Modular Core Switch is a compact modular data center core switch supporting virtualized data centers and evolutionary needs of private and public clouds deployments. Delivering unprecedented levels of performance, buffering, scale, and availability with high density 10GbE, 40GbE and 100GbE interfaces at a lower cost, using only a fraction of the footprint used by traditional chassis. The switch supports full Layer 2 and 3 features, including advanced features such as TRILL and HP Intelligent Resilient Fabric (IRF), which enable scale-out, two-tier leaf-spine architecture.
in stock
Description
| HPE FlexFabric 7904 – switch – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – Managed |
| Enclosure Type | Rack-mountable 2U |
| Performance | Throughput: 2.3 Bpps ¦ Switching capacity: 3.8 Tbps |
| Capacity | IPv4 routing table entries: 32768 |
| MAC Address Table Size | 131072 entries |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, IGMP, ECMP |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, CLI |
| Features | Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA) |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 44 cm x 72 cm x 8.81 cm |
| Manufacturer Warranty | 1 year warranty |
| General | |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2) |
| Capacity | IPv4 routing table entries: 32768 |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba |
| Device Type | Switch – Managed |
| Enclosure Type | Rack-mountable 2U |
| Features | Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA) |
| Flash Memory | 1 GB |
| MAC Address Table Size | 131072 entries |
| Performance | Throughput: 2.3 Bpps ¦ Switching capacity: 3.8 Tbps |
| Processor | 1 x MIPS MIPS64: 1.2 GHz |
| RAM | 8 GB DDR2 SDRAM |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, CLI |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, IGMP, ECMP |
| Dimensions & Weight | |
| Depth | 72 cm |
| Height | 8.81 cm |
| Width | 44 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 95% (non-condensing) |
| Humidity Range Storage | 5 – 95% (non-condensing) |
| Max Operating Temperature | 40 °C |
| Max Storage Temperature | 70 °C |
| Min Operating Temperature | 0 °C |
| Min Storage Temperature | -40 °C |
| Expansion / Connectivity | |
| Expansion Slots | 4 (total) / 4 (free) x Expansion Slot |
| Installed Modules Qty (Max) | 0 (installed) / 4 (max) |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – 1 year – response time: 10 days |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, FDA, CAN/CSA C22.2 No. 60950-1, VCCI Class A, EN 50581 |
| Rack Mounting Kit | Included |
| Power | |
| Installed Qty | 0 (installed) / 2 (max) |
| Power Device | Internal power supply |
| Power Redundancy | Optional |
Only logged in customers who have purchased this product may leave a review.
Related products
HPE XP24000 Upgrade DKC 12V Battery PN : AE160AU
HPE XP24000 Upgrade DKC 12V BatteryHPE XP24000 Upgrade DKC 12V Battery
HPE Front to Back Airflow Fan Tray network device fan tray
The HP FlexFabric 7904 front to back airflow Fan Tray provides powerful cooling and heat dissipation for the switch. It blows exhaust air out of the switch from the port side to the power side. The fan tray has five fans and features small size, fast heat dissipation, and hot swapping. It can automatically adjust…The HP FlexFabric 7904 front to back airflow Fan Tray provides powerful cooling and heat dissipation for the switch. It blows exhaust air out of…
HPE FC Module expansion module
Service processing unit for the HP MSR4000 Router performs data forwarding, encryption / decryption, and analyzing / filtering of data packets, features 4 1000BASE-T, 4 SFP, 1 SFP+, and 2 VPM slots; 4GB DDR3 default memory.Service processing unit for the HP MSR4000 Router performs data forwarding, encryption / decryption, and analyzing / filtering of data packets, features 4 1000BASE-T, 4…
Reviews
There are no reviews yet.