HPE FlexFabric 7910 switch – Managed – rack-mountable

3,743.63 $

HP FlexFabric 7900 Modular Core Switch is a compact modular data center core switch supporting virtualized data centers and evolutionary needs of private and public clouds deployments. Delivering unprecedented levels of performance, buffering, scale, and availability with high density interfaces at a lower cost, using only a fraction of the footprint used by traditional chassis.

The switch supports full Layer 2 and 3 features, including advanced features such as TRILL and HP Intelligent Resilient Fabric (IRF), which enable scale-out, two-tier leaf-spine architecture.

in stock

SKU: JG841A Category:

Description

HPE FlexFabric 7910 – switch – Managed – rack-mountable
Device Type Switch – L3 – Managed
Enclosure Type Rack-mountable 5U
Performance Throughput (64-byte packet size): 5.8 Bpps ¦ Switching capacity: 9.6 Tbps
Capacity IPv4 routing table entries: 32768
MAC Address Table Size 131072 entries
Jumbo Frame Support 12288 bytes
Routing Protocol OSPF, RIP, BGP-4, IS-IS, IGMPv2, IGMP, IGMPv3, static IPv4 routing, ECMP
Remote Management Protocol SNMP 1, SNMP 2, RMON, SNMP 3, CLI
Features Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA)
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba
Power AC 120/230 V (50/60 Hz)
Power Redundancy Optional
Dimensions (WxDxH) 43.99 cm x 76 cm x 22 cm
Weight 28.8 kg
Manufacturer Warranty 1 year warranty
General
Authentication Method RADIUS, Secure Shell v.2 (SSH2)
Capacity IPv4 routing table entries: 32768
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3ba
Device Type Switch – L3 – Managed
Enclosure Type Rack-mountable 5U
Features Flow control, DHCP support, ARP support, VLAN support, traffic shaping, port mirroring, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), IPv4 support, port isolation, static routing, packet storm protection, Loopback, Network Quality Analyzer (NQA)
Flash Memory 1 GB
Jumbo Frame Support 12288 bytes
MAC Address Table Size 131072 entries
Performance Throughput (64-byte packet size): 5.8 Bpps ¦ Switching capacity: 9.6 Tbps
Processor 1 x MIPS MIPS64: 1 GHz
RAM 8 GB DDR2 SDRAM
Remote Management Protocol SNMP 1, SNMP 2, RMON, SNMP 3, CLI
Routing Protocol OSPF, RIP, BGP-4, IS-IS, IGMPv2, IGMP, IGMPv3, static IPv4 routing, ECMP
Dimensions & Weight
Depth 76 cm
Height 22 cm
Weight 28.8 kg
Width 43.99 cm
Environmental Parameters
Humidity Range Operating 10 – 95% (non-condensing)
Humidity Range Storage 5 – 95% (non-condensing)
Max Operating Temperature 40 °C
Max Storage Temperature 70 °C
Min Operating Temperature 0 °C
Min Storage Temperature -40 °C
Expansion / Connectivity
Expansion Slots 10 (total) / 10 (free) x Expansion Slot
Installed Modules Qty (Max) 0 (installed) / 10 (max)
Manufacturer Warranty
Service & Support Limited warranty – advance parts replacement – 1 year – response time: 10 days
Miscellaneous
Compliant Standards CISPR 22 Class A, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, FDA, CAN/CSA C22.2 No. 60950-1, VCCI Class A, EN 50581
Rack Mounting Kit Included
Power
Installed Qty 0 (installed) / 2 (max)
Power Device Internal power supply
Power Redundancy Optional
Voltage Required AC 120/230 V (50/60 Hz)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.