771.47 $
HP Solid State drives deliver exceptional performance for customers with applications requiring high random read IOPs performance. Based on Single Level Cell (SLC) or Multi level Cell (MLC) NAND Flash technology, they support HP ProLiant servers and server storage platforms. They are available as Small Form Factor (SFF) and Large Form Factor (LFF) hot plug devices, non-hot plug SFF devices, and SFF Quick Release devices. These drives deliver higher performance, lower latency and low power solutions when compared with traditional rotating media and fit seamlessly into the existing HP server infrastructure.
in stock
HPE Value Endurance Enterprise Boot – solid state drive – 300 GB – SATA 6Gb/s | |
---|---|
Type | Solid state drive – hot-swap |
Capacity | 300 GB |
Form Factor | 3.5" LFF |
Interface | SATA 6Gb/s |
Data Transfer Rate | 600 MBps |
Dimensions (WxDxH) | 15 mm x x |
Manufacturer Warranty | 3 years warranty |
Bundled with | HP SmartDrive carrier |
Designed For | ProLiant DL160 Gen8, DL180 Gen9, DL320e Gen8, DL360 Gen9, DL360e Gen8, DL380 Gen9, DL380e Gen8, DL380p Gen8, DL385p Gen8, ML110 Gen9, ML350 Gen9, ML350e Gen8, ML350p Gen8, SL4540 Gen8, SL4545 G7; StoreEasy 1650 |
General | |
Bundled with | HP SmartDrive carrier |
Capacity | 300 GB |
Device Type | Solid state drive – hot-swap |
Form Factor | 3.5″ LFF |
Height | 15 mm |
Interface | SATA 6Gb/s |
Compatibility Information | |
Designed For | HPE ProLiant DL160 Gen8 (3.5″), DL160 Gen8 Base (3.5″), DL160 Gen8 Entry (3.5″), DL160 Gen8 Performance (3.5″), DL180 Gen9 (3.5″), DL180 Gen9 Base (3.5″), DL180 Gen9 Entry (3.5″), DL180 Gen9 Storage (3.5″), DL320e Gen8 (3.5″), DL320e Gen8 Base (3.5″), DL320e Gen8 Entry (3.5″), DL320e Gen8 Performance (3.5″), DL320e Gen8 v2 (3.5″), DL320e Gen8 v2 Base (3.5″), DL320e Gen8 v2 Performance (3.5″), DL360 Gen9 CMS (3.5″), DL360 Gen9 Entry (3.5″), DL360e Gen8 (3.5″), DL360e Gen8 Base (3.5″), DL360e Gen8 Entry (3.5″), DL360e Gen8 Performance (3.5″), DL360e Gen8 Special Server (3.5″), DL380 Gen9 (3.5″), DL380 Gen9 Base (3.5″), DL380 Gen9 Entry (3.5″), DL380 Gen9 Performance (3.5″), DL380e Gen8 (3.5″), DL380e Gen8 Base (3.5″), DL380e Gen8 Entry (3.5″), DL380e Gen8 High Performance (3.5″), DL380e Gen8 Storage (3.5″), DL380p Gen8 (3.5″), DL380p Gen8 Base (3.5″), DL380p Gen8 Entry (3.5″), DL380p Gen8 High Performance (3.5″), DL380p Gen8 Performance (3.5″), DL380p Gen8 Special (3.5″), DL385p Gen8 (3.5″), DL385p Gen8 Dedicated Workload (3.5″), DL385p Gen8 Entry (3.5″), DL385p Gen8 Maximized Consolidation (3.5″), DL385p Gen8 Storage (3.5″), DL385p Gen8 Storage Centric (3.5″), ML110 Gen9 (3.5″), ML110 Gen9 Base (3.5″), ML110 Gen9 Entry (3.5″), ML350 Gen9 (3.5″), ML350 Gen9 Base (3.5″), ML350 Gen9 Entry (3.5″), ML350 Gen9 Performance (3.5″), ML350e Gen8 (3.5″), ML350e Gen8 Base (3.5″), ML350e Gen8 Entry (3.5″), ML350e Gen8 Performance (3.5″), ML350e Gen8 v2 (3.5″), ML350p Gen8 (3.5″), ML350p Gen8 Base (3.5″), ML350p Gen8 Entry (3.5″), ML350p Gen8 Performance (3.5″), ML350p Gen8 Special Server (3.5″), SL4540 Gen8 (3.5″), SL4540 Gen8 Tray 2x Node Server (3.5″), SL4545 G7 (3.5″) ¦ HPE StoreEasy 1650 |
Environmental Parameters | |
Max Operating Temperature | 60 °C |
Min Operating Temperature | 0 °C |
Expansion & Connectivity | |
Compatible Bay | 3.5″ LFF |
Interfaces | 1 x SATA 6 Gb/s – 7 pin Serial ATA |
Manufacturer Warranty | |
Service & Support | Limited warranty – 3 years |
Performance | |
4KB Random Read | 64000 IOPS |
Drive Transfer Rate | 600 MBps (external) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.