HPE StorageWorks Modular Disk System 600 with two Dual Port I/O Module System hard drive array
7,295.53 $
Finding it difficult to keep up with the growth in unstructured data? Looking for a cost-effective high capacity storage option?
With the HP StorageWorks 600 Modular Disk System, HP extends and redefines direct-attached storage for BladeSystem servers, combining the simplicity and cost effectiveness of direct-attached storage without sacrificing flexibility or performance.
Use the MDS600 as part of a straight-forward in-rack 3 Gb/s SAS implementation that delivers high-density, low-cost external zoned direct attach storage for HP BladeSystem servers. Easily configure storage on the fly with easy to use management software.
in stock
Description
| HPE StorageWorks Modular Disk System 600 with two Dual Port I/O Module System – hard drive array | |
|---|---|
| Device Type | Hard drive array |
| Enclosure Type | Rack-mountable – 5U |
| Interface | SAS |
| Installed Devices / Modules Qty | 0 (installed) / 70 (max) |
| Supported Drives | SATA-300 / SAS |
| Storage Controller | RAID (SATA 3Gb/s / SAS) |
| Hard Drive | 0 HDD SATA 3Gb/s / SAS – hot-swap |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 44.7 cm x 89.1 cm x 22.1 cm |
| Weight | 72.6 kg |
| Manufacturer Warranty | 3 years warranty |
| General | |
| Device Type | Hard drive array |
| Enclosure Type | Rack-mountable – 5U |
| Chassis | |
| Installed Devices / Modules Qty | 0 |
| Supported Devices / Modules Qty | 70 |
| Supported Drives | SATA-300 / SAS |
| Dimensions & Weight | |
| Depth | 89.1 cm |
| Height | 22.1 cm |
| Weight | 72.6 kg |
| Width | 44.7 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% |
| Max Operating Temperature | 35 °C |
| Min Operating Temperature | 10 °C |
| Expansion / Connectivity | |
| Expansion Bays | 70 (total) / 70 (free) – 3.5″ x 1/3H |
| Interfaces | 4 x SAS (input) ¦ 4 x SAS (output) ¦ 4 x SAS – 26 pin 4x Shielded Mini MultiLane SAS (SFF-8088) |
| Hard Drive | |
| Capacity | 0 |
| Interface Type | SATA 3Gb/s / SAS |
| Type | HDD – hot-swap |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – parts – 3 years |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, CISPR 24, EN55022, EN55024, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1-03, FCC CFR47 |
| Power | |
| Max Supported Qty | 4 |
| Power Device | 4 x internal power supply – hot-plug |
| Power Provided | 1200 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Storage | |
| HDD Array External Interface | SAS |
| Storage Controller | |
| Data Transfer Rate | 300 MBps |
| Interface Type | SATA 3Gb/s / SAS |
| Supported Devices | Disk array (RAID) |
| Type | RAID |
Only logged in customers who have purchased this product may leave a review.
Related products
Brocade XBR-R000291 Deep rack mounting kit – 27"-31" – HPE Complete
Marketing description is not available.Marketing description is not available.
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W switch – 24 ports – Managed – rack-mountable
The HPE OfficeConnect 1920S switch series consists of advanced smart-managed fixed-configuration Gigabit switches designed for small businesses in an easy-to-administer solution. All HPE OfficeConnect 1920S switches support flexible installation options, including mounting on wall, under table, or on desktop.The HPE OfficeConnect 1920S switch series consists of advanced smart-managed fixed-configuration Gigabit switches designed for small businesses in an easy-to-administer solution. All HPE OfficeConnect 1920S…
HPE switch – Managed
Marketing description is not available.Marketing description is not available.
Reviews
There are no reviews yet.