7,352.97 $
The HP 5500 HI Series of Gigabit Ethernet switches delivers outstanding resiliency, security, and multiservice support capabilities at the edge layer of data center, large campus, and metro Ethernet networks. The switches can also be used in the core layer of SMB networks. The HP 5500 HI Switch Series supports dual power supply and IRF virtual fabric to provide the highest levels of resiliency and manageability. With complete IPv4/IPv6 and MPLS/VPLS features, the series provides investment protection with an easy transition from IPv4 to IPv6 networks. Designed with two fixed 10G ports and extension flexibility, these switches can provide up to six 10-GbE uplink or 70 GbE ports.
in stock
HPE 5500-48G-4SFP HI Switch with 2 interface Slots – switch – 48 ports – Managed – rack-mountable | |
---|---|
Device Type | Switch – 48 ports – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 4 x Gigabit SFP + 2 x SFP+ |
Performance | Routing/switching capacity: 224 Gbps ¦ Throughput: 166.6 Mpps |
Capacity | Routing table entries: 12000 |
MAC Address Table Size | 32K entries |
Jumbo Frame Support | Yes |
Routing Protocol | OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD) |
Remote Management Protocol | SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, CLI |
Features | Layer 2 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.1ab (LLDP) |
Power | AC 120/230 V (50/60 Hz) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44 cm x 42 cm x 4.4 cm |
Weight | 8.5 kg |
General | |
Authentication Method | RADIUS |
Capacity | Routing table entries: 12000 |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.1ab (LLDP) |
Device Type | Switch – 48 ports – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Features | Layer 2 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support |
Flash Memory | 512 MB |
Jumbo Frame Support | Yes |
MAC Address Table Size | 32K entries |
Performance | Routing/switching capacity: 224 Gbps ¦ Throughput: 166.6 Mpps |
Ports | 48 x 10/100/1000 + 4 x Gigabit SFP + 2 x SFP+ |
RAM | 1 GB SDRAM |
Remote Management Protocol | SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, CLI |
Routing Protocol | OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD) |
Subtype | Gigabit Ethernet |
Dimensions & Weight | |
Depth | 42 cm |
Height | 4.4 cm |
Weight | 8.5 kg |
Width | 44 cm |
Environmental Parameters | |
Humidity Range Operating | 5 – 95% (non-condensing) |
Max Operating Temperature | 50 °C |
Max Storage Temperature | 70 °C |
Min Operating Temperature | 0 °C |
Min Storage Temperature | -40 °C |
Expansion / Connectivity | |
Expansion Slots | 2 (total) / 2 (free) x Expansion Slot |
Installed Modules Qty (Max) | 0 (installed) / 2 (max) |
Interfaces | 48 x 1000Base-T RJ-45 ¦ 4 x Ethernet 1000 – SFP (mini-GBIC) ¦ 2 x SFP+ ¦ 1 x console RJ-45 management |
Miscellaneous | |
Compliant Standards | RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, CAN/CSA C22.2 No. 60950-1, EN 60825-2 |
Rack Mounting Kit | Included |
Power | |
Installed Qty | 0 (installed) / 2 (max) |
Power Device | Internal power supply |
Power Redundancy | Optional |
Power Redundancy Scheme | 1+1 (with optional power supply) |
Voltage Required | AC 120/230 V (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.