HPE FlexNetwork 5940 switch – 48 ports – Managed – rack-mountable
17,973.98 $
Ultimate flexibility for an ever-changing Data Center requirements. This entire series is part of the Hewlett Packard Enterprise FlexFabric data center solution, which is a cornerstone of the FlexNetwork architecture.
The FlexFabric 5940 Switch Series is ideally suited for deployment at the aggregation or server access layer of large enterprise data centers, or at the core layer of medium-sized enterprises. With the increase pace of deploying virtualized applications, adopting software-defined networking, and the server-to-server traffic, many data centers now require spine and ToR switch innovations that will meet their requirements. The HPE FlexFabric 5940 is optimized to meet the increasing requirements for higher-performance server connectivity, convergence of Ethernet and storage traffic, the capability to handle virtual environments, and low-latency.
in stock
Description
| HPE FlexNetwork 5940 – switch – 48 ports – Managed – rack-mountable | |
|---|---|
| Device Type | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x 1 Gigabit / 10 Gigabit SFP+ + 6 x 40 Gigabit / 100 Gigabit QSFP28 |
| Performance | Latency (10 Gbps): < 1 µs ¦ Throughput: up to 1607 Mpps ¦ Routing/switching capacity: 2160 Gbps |
| Capacity | VXLAN tunnels: up to 4000 ¦ VLANs supported: 4096 ¦ IPv4 routing table entries: 120000 ¦ IPv6 routing table entries: 60000 |
| MAC Address Table Size | 288K entries |
| Jumbo Frame Support | 10000 bytes |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, static IPv6 routing, ECMP, RIPng, MLDv2, Bidirectional Forwarding Detection (BFD), BGP+ |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, CLI, SNMP 4 |
| Features | Flow control, DHCP support, ARP support, port mirroring, Weighted Round Robin (WRR) queuing, SNTP support, Weighted Fair Queuing (WFQ), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Switch Redundancy Protocol (VSRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, LLDP support, Link Aggregation Control Protocol (LACP), Data Center Bridging (DCB), redundant hot swappable fans, Class of Service (CoS), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), Multicast Border Gateway Protocol (MBGP), reverse airflow support, 12.2MB packet buffer, Precision Time Protocol (PTP), FCoE support, RDMA over Converged Ethernet (RoCE), In-Service Software Upgrade (ISSU), FCoE Initialization Protocol (FIP), Shortest Path Bridging (SPB), Explicit Congestion Notification (ECN), Priority-Based Flow Control (PFC), Ethernet Virtual Private Network (EVPN), Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR), layer 4 classification |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3ag |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 44 cm x 46 cm x 4.36 cm |
| General | |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
| Capacity | VXLAN tunnels: up to 4000 ¦ VLANs supported: 4096 ¦ IPv4 routing table entries: 120000 ¦ IPv6 routing table entries: 60000 |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3ag |
| Device Type | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type | Rack-mountable 1U |
| Features | Flow control, DHCP support, ARP support, port mirroring, Weighted Round Robin (WRR) queuing, SNTP support, Weighted Fair Queuing (WFQ), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Switch Redundancy Protocol (VSRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, LLDP support, Link Aggregation Control Protocol (LACP), Data Center Bridging (DCB), redundant hot swappable fans, Class of Service (CoS), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), Multicast Border Gateway Protocol (MBGP), reverse airflow support, 12.2MB packet buffer, Precision Time Protocol (PTP), FCoE support, RDMA over Converged Ethernet (RoCE), In-Service Software Upgrade (ISSU), FCoE Initialization Protocol (FIP), Shortest Path Bridging (SPB), Explicit Congestion Notification (ECN), Priority-Based Flow Control (PFC), Ethernet Virtual Private Network (EVPN), Network Timing Protocol (NTP), Weighted Deficit Round Robin (WDRR), layer 4 classification |
| Fibre Channel | FC-BB-5 |
| Flash Memory | 1 GB |
| Jumbo Frame Support | 10000 bytes |
| MAC Address Table Size | 288K entries |
| Max Units In A Stack | 9 |
| Performance | Latency (10 Gbps): < 1 µs ¦ Throughput: up to 1607 Mpps ¦ Routing/switching capacity: 2160 Gbps |
| Ports | 48 x 1 Gigabit / 10 Gigabit SFP+ + 6 x 40 Gigabit / 100 Gigabit QSFP28 |
| RAM | 4 GB |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, CLI, SNMP 4 |
| Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, static IPv6 routing, ECMP, RIPng, MLDv2, Bidirectional Forwarding Detection (BFD), BGP+ |
| Subtype | 10 Gigabit Ethernet |
| Dimensions & Weight | |
| Depth | 46 cm |
| Height | 4.36 cm |
| Width | 44 cm |
| Environmental Parameters | |
| Humidity Range Operating | 10 – 90% (non-condensing) |
| Max Operating Temperature | 45 °C |
| Min Operating Temperature | 0 °C |
| Expansion / Connectivity | |
| Interfaces | 48 x Gigabit / 10Gbit LAN SFP+ ¦ 6 x 100Gbit/40Gbit LAN QSFP28 ¦ 1 x serial (console) RJ-45 ¦ 1 x management RJ-45 ¦ 1 x management (Gigabit LAN) SFP ¦ 1 x USB 2.0 ¦ 1 x mini-USB 2.0 |
| Miscellaneous | |
| Compliant Standards | CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, ANATEL, UL-AR, EN 60825-1, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, EMC 2004/108/EC, EN 55022 Class A, FCC CFR47 Part 15 A, EN 55024:1998+A1:2001+A2:2003, EN 60950-1/A11, FDA 21 CFR, ANSI/TIA-1057 |
| Included Accessories | 2 x HPE X711 front (port side) to back (power side) airflow high volume fan tray |
| Power | |
| Features | Front-to-rear air?ow |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Device | Internal power supply – hot-plug |
| Power Provided | 650 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Only logged in customers who have purchased this product may leave a review.
Related products
Aruba 2530-8-PoE+ Internal Power Supply switch – 8 ports – Managed – rack-mountable
The HP 2530 switch series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, and IPv6 host support.The HP 2530 switch series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full…
HPE switch – Managed
Marketing description is not available.Marketing description is not available.HPE OfficeConnect 1920S 48G 4SFP switch – 48 ports – Managed – rack-mountable
The HPE OfficeConnect 1920S Switch Series, is designed for small businesses that require enhanced performance to support bandwidth-demanding applications. They are ideal for environments that require advanced features for granular control and where smart-managed flexibility is a must for easy network configuration and management. The switches are advanced smart-managed fixed configuration Gigabit switches that are…The HPE OfficeConnect 1920S Switch Series, is designed for small businesses that require enhanced performance to support bandwidth-demanding applications. They are ideal for environments that…
Reviews
There are no reviews yet.